Knife Firebird F7531 (Black, Green, Orange)

Description of the Firebird F7531 knife:

This folding knife is always useful for nature trips, because it fits easily in your pocket, and the blade while carrying is placed in a safe position. However, the Firebird model 7531 is popular not only because of this. This blade is a universal blade for its intended purpose, which is perfectly adapted for tourist purposes, fishing or hunting trips, any travel and even lessons in extreme kinds of leisure activities and sports. The F7531 Firebird blade is made from stainless steel, which is standard 440C. The quality of the metal allows the knife to remain in good condition even after frequent contact with water, combined well with the possibility of tempering to 58 HRC. As a result, the Firebird F7531 knife requires minimum care and only occasional sharpening. The blade is sharpened entirely smooth and is in the form of a clip-point with a slightly sloping top, which resembles grinding. This knife blade length is 89 mm.

In the open position, the length of the Firebird F7531 is 21 cm. The handle of this knife is made using a composite material G10. Quality is obtained by combining fiberglass with epoxy resins. This material is quite easy, but almost equal strength steel basis. Small textured rolling on plastic helps hold the knife in the hand. A clip the same used to be worn on a belt, is made of steel.

It is also important that the knife used in the model Castle G-lock is easily triggered at the expense of the spring-loaded pin and securely holds the blade is in the fully open position. An independent actuation lock removed features of his design.

Features:

• knife with folding blade;
• total length is 21 cm;
• the length of the blade alone is 8.9 cm;
• mark metal blade is 440C;
• steel tempered to 58 HRC hardness;
• smooth sharpening;
• the shape of the blade on this model is clip-point;
• finishing grinding-satin finish;
• material overlap arm-G10;
• integrated lock G-lock;
• model Firebird 7531 weighs 126 grams.